UV DTF Gang Sheet Builder

Product Details

• Unrivaled Adhesive Performance: Experience the pinnacle of adhesive innovation with our UV/DTF. These stickers are designed to stay put, gracing laptops, water bottles, car windows, and more with incredible adhesion.
• Exceptional Durability: Blending cutting-edge UV DTF technology with unbeatable adhesive properties, our UV/DTF are built to stand the test of time, offering unmatched durability for your designs.
• Vibrant Colors That Endure: Crafted using state-of-the-art UV DTF printing technology, our UV/DTF showcase vibrant colors that resist fading over time, even when exposed to sunlight and harsh weather conditions.

Template Requirements

To ensure your UV/DTF adhere correctly, follow these four simple steps.

1. Prep Your Surface and Pre-Squeegee Your UV/DTF Transfers

Prepping the Area – Clean the surface of your item before applying the UV/DTF Transfers using either soap & water or a mixture of rubbing alcohol and water (50/50 mix). The cleaner the surface, the more permanent to natural elements and wear and tear.

Pre-Squeegee – After cutting out your UV/DTF, place the design face down with the white side facing up. Using the padded end of the included squeegee or credit card, run over it with hard pressure, back and forth 3-5 times. This forces the design onto the clear carrier sheet.

2. Separating The Clear Carrier Sheet From The White Backing

Separate the clear carrier sheet from the white backing by making a small tear. Do not tear near the design. Next, SLOWLY separate the clear carrier sheet from the white backing, This ensures every piece of your design is lifting onto the clear carrier sheet. If it’s not, set it back down, squeegee again, and try pulling that specific area which didn’t lift from a different side. The more thin and separated design elements there are, such as small text, the slower you should peel. The larger the design elements, the less careful you need to be. You will get a feel for it as you continue to work with our UV/DTF transfers.

3. Placing your UV/DTF Onto Your Item

First, identify the placement area on your item. Then lay the design down starting from one side and ending at the other. This will help control your placement, reduce bubbles underneath the design, and avoid wrinkling of the carrier sheet which could cause design elements being offset and/or design overlapping. Tip: Leave an edge of the carrier sheet lifted, so you can easily grip it.

4. Completing The Transfer Process

After placing, use the padded end of the squeegee to run over it with hard pressure, back and forth 3-5 times. This forces adhesion to your item. You are now ready to SLOWLY peel. Again, use your eyes while you peel to ensure every element of your design remains on your item. While peeling, move your grip inward to maintain a controlled peel. If all elements do not transfer, you can lay the clear carrier sheet back down, squeegee hard again, and try pulling that specific area which didn’t lift from a different side.

Refunds & Reprints

Contact us within 30 days of receiving your order to submit a request for a refund or reprint. We will reprint any order where there is a print quality or adherence issue. However, we will not issue a reprint if the uploaded file is low quality. If you’d like a refund or reprint for another reason, it must be approved by management first.